Advantages of Protektive Pak® Material

Protektive Pak® Material is made from static dissipative impregnated corrugated material with a buried shielding layer – it provides static shielding to protect ESD sensitive items from ElectroStatic charges, and ElectroStatic Discharges [ESD].

Introduction to Protektive Pak® Material

So now you’re probably wondering what’s different about this type of material – loads of companies out there offer similar products, right? That’s true – BUT what makes Protektive Pak® Material so unique is that its ESD properties are manufactured into the liners of the material itself. Many other materials have a coating or paint applied that gives them their ESD properties. This in itself is not a problem. However, it becomes an issue if the outer layer of your ESD container is damaged.

Protektive Pak In-Plant HandlersProtektive Pak® Inplant Handler – for more information click here

Have you ever removed tape from your ESD container or accidently pierced the surface with a sharp object? If you have, chances are you’ve found the black coat give way to a lighter brown material. That’s your ESD properties gone potentially damaging your ESD sensitive devices inside the ESD container. This will not happen with Protektive Pak® Material – even if the outer layer is damaged, your ESD sensitive items are still protected. Not convinced? Check-out this video.

Pink vs. Black FoamProtektive Pak® Circuit Board Shippers – for more information click here

Advantages of Protektive Pak® Material:

Independent ESD tests have proven that Protektive Pak® Impregnated Corrugated Material is superior! Click here to see the full test report. The bottom line is:

  1. Protektive Pak® impregnated corrugated material has a buried shielding layer.
  2. Protektive Pak® impregnated corrugated material equals or exceeds the discharge shielding capabilities of a coated box.
  3. Protektive Pak® impregnated corrugated material has discharge shielding capabilities equal to a metal-out shielding bag.
  4. Protektive Pak® impregnated corrugated material meets the ANSI/ESD S541 recommendation, avoiding rapid discharge when contacting ESD sensitive items – coated boxes DO NOT.

Comparing Impregnated Corrugated Protektive Pak® and Coated Materials

Now that we have talked about the advantages of Protektive Pak® Material – how exactly does it compare to the more common coated materials out there on the market? The below table provides a summary:

Impregnated vs. Coated Material
1 CONSISTENT QUALITY
Manufactured by one paper mill with computerized control, resulting in consistent high quality.
Manufactured without computer controls and applied at various geographical locations, resulting in quality variations.
2 STATE-OF-THE-ART TECHNOLOGY
Carbon is added during the paper making process. The paper is a 6-layer process. The top surface layer is static dissipative, measuring 107 to 109 ohms. The conductive layer is in the 5th layer from the surface measuring <104 ohms.
Material is coated or printed with carbon loaded black ink which is then coated with a clear sealer to help coating stay on. Shielding layer is very close to surface and high carbon content can bleed through. Result is very poor and inconsistent static dissipative effectiveness.
3 LOWER SULPHUR CONTENT
Manufactured from 100% recycled paper with consistently low sulphur content.
Manufactured from either recycled or virgin paper or a combination of both. sulphur content may be low or high which can cause corrosion to leads and circuits.
4 GREATER DURABILITY
1,000 Times Thicker: Abrasion tests have shown no loss in particles at 100 cycles, only 1% loss for 200 cycles and 60% loss for 500 cycles.
Tests have shown a 50% loss in particles in only 10 cycles and a 100% loss in 100 cycles.
5 SLOWS RAPID DISCHARGE
Burying the conductive layer under a dissipative surface reduces the potential for a rapid discharge when contacted by a charged device.
A very conductive surface that may pose a charged device model (CDM) ESD danger to components stored in open bin boxes, in-plant handlers, shippers, totes, nesting trays, etc.
6 BETTER SHIELDING EFFECTIVENESS
Shielding effectiveness is equal to or greater than coated conductive materials.
Some coated products shield poorly due to inconsistent application procedures by some manufacturers.
7 BETTER VALUE
More durable structure, 1,000 times thicker, which consistently shields your product from ESD, is also safer and better for the environment.
Simple structure which can lack consistency of ESD shielding, durability and safety.
PPK Material Carbon Coated Material
Graphite Printed Material

All microscopic photos are approximately the same scale. A PDF version of the above table is available here.

Advertisements

About Charleswater

Charleswater offers a full range of ESD solutions for the European market, including ESD mats and ground cords, wrist straps and coil cords, ESD shielding bags, foot grounders, floor finish, EMIT ionisers and test equipment, Menda tools and workbench accessories, all manufactured in our USA and UK facilities.

Posted on March 9, 2017, in Protektive Pak. Bookmark the permalink. 1 Comment.

  1. Reblogged this on .

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: