The patented* SmartLog V5™ system is designed for fast, frequent and accurate testing of ESD personnel grounding items. The SmartLog V5™ records ESD test data and exports it to a central PC or server in real-time where it can be managed and reported using TEAM5 Software.
- Single-wire and Dual-wire Wrist Strap Compatible
- Embedded CCD Barcode Scanner
- Ethernet Communication
- Adjustable Resistance Limits
- Programmable Test Requirements
- Compatible with Proximity Readers
- Embedded relay terminal for use with electronic
TEAM5 is the most powerful and accurate ESD Test Acquisition Software on the market. Use TEAM5 to automate and manage the ESD test data collected by the SmartLog V5™.
Click here to learn more.
|50762||Smartlog V5™, Europe, w/o Software||£2,294.72|
|50763||SmartLog V5™, Euro, 10MM Adapter, w/o Software||£2,294.72|
|50764||Reader Only, SmartLog V5™, HID ProxPoint Plus||£ 370.28|
|50765||Reader Only, SmartLog V5™, HID iClass||£ 383.04|
|50491||TEAM5 Enterprise Software with 1 Year Service||£3,886.16|
|50493||TEAM5 Software with 1 Year Service||£ 623.36|
“Compliance verification records shall be established and maintained to provide evidence of conformity to the technical requirements. The test equipment selected shall be capable of making the measurements defined in the compliance verification plan.” [EN 61340-5-1 Edition 1.0 2007-08 clause 5.2.3 Compliance verification plan]
All Items & programs are available through your participating distributor | Submit your questions HERE
Leading companies use continuous monitors as a cost effective component in satisfying some of the audit and check requirements of EN 61340-5-1.
Wrist strap testing “Where continuous monitoring is used, no additional testing is required.” [EN 61340-4-1, per A.5.2]
“The wrist band will normally be worn for several hours at a time so it needs to be comfortable while making good contact with the skin. It is a good idea to check the wrist strap every time it is applied. Constant on line monitors can be used so that any breaks will be immediately found.” [EN 61340-5-2 clause 5.2.7]
“A properly grounded wrist strap will keep a person’s body voltage to approximately + 10 V. The main advantage to a constant [or continuous] monitor is the immediate indication that the employee receives if the wrist strap falls open. With an unmonitored system, the employee will not be aware of a wrist strap failure until the start of the next shift. This has reliability benefits for an ESD program as it might help reduce or eliminate ESD damage.
There are also other process benefits from using constant monitors such as the elimination of the need to maintain daily test logs and a reduction in the time for employees to make the daily test. For units that also monitor the connection of a work surface to protective earth, it is also possible to reduce or eliminate the checking of the work surface as part of the periodic audit of the process.
Constant monitors might be implemented by an organization due to high reliability requirements imposed by customers.” [CLC/TR 61340-5-2:2008 User guide Annex B.1.3 Constant monitors]
“In many EPAs [ESD protected areas] constant monitor wrist straps are used. These fall into two categories, dual wrist band and single wrist band. The dual wrist strap type using a split band is used with a two core cord.
The dual wrist strap type normally works using the resistance bridge method.
The single wrist strap type uses a single strap for both grounding and monitor purposes and has an a.c. signal injected which is used for monitoring purposes. This type has the advantage of using the simpler single wrist strap.” [EN 61340-5-1 A.5 Wrist straps]
See selection of Charleswater Continuous Monitors.