Blog Archives
Introducing the New EMIT Zero Volt Monitor Solo!
- Single Station Continuous Dual-Wire Monitor
Continuously monitors the ground integrity and charge generation of one operator and supervisor as well as the ground integrity for one ESD worksurface and one optional tool, eliminating the need for periodic testing and record keeping of wrist straps - Patented* Dual Polarity Technology
Provides Real-Time Continuous Monitoring for Operator Path-to-Ground and Presence of 1 Meg Resistor True continuous monitoring (versus pulsed) instantaneously detects broken cords, intermittent faults, dry skin, loose bands and low resistance. - Dual Polarity Technology
Steady-State DC Dual Polarity Signal yields virtually zero voltage on the operator - Operator Charge Detection Alarm
Alarms if the operator generates or comes in contact with a voltage that would be dangerous to an ESD susceptible item - RS-485 Communication Ports
Use with EMIT SIM Software for test data acquisition and management - User Adjustable Features
Use the internal DIP switches to enable / disable test circuits and modify the operator test voltage, operator charge detection voltage and worksurface resistance limit - NIST Calibrated with Certificate
Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on calibration of EMIT products see Calibration
Item | Description | Price |
50579 | ZVM Solo, Europe | $334.97 |
“A properly grounded wrist strap will keep a person’s body voltage to approximately + 10 V. The main advantage to a constant [or continuous] monitor is the immediate indication that the employee receives if the wrist strap falls open. With an unmonitored system, the employee will not be aware of a wrist strap failure until the start of the next shift. This has reliability benefits for an ESD program as it might help reduce or eliminate ESD damage.
There are also other process benefits from using constant monitors such as the elimination of the need to maintain daily test logs and a reduction in the time for employees to make the daily test. For units that also monitor the connection of a work surface to protective earth, it is also possible to reduce or eliminate the checking of the work surface as part of the periodic audit of the process.
Constant monitors might be implemented by an organization due to high reliability requirements imposed by customers.” [CLC/TR 61340-5-2:2008 User guide Annex B.1.3 Constant monitors]
*US patents 6,052,053 and 6,205,408
SmartLog V5™ Data Acquisition System – ESD Data at your Fingertips
The patented* SmartLog V5™ system is designed for fast, frequent and accurate testing of ESD personnel grounding items. The SmartLog V5™ records ESD test data and exports it to a central PC or server in real-time where it can be managed and reported using TEAM5 Software.
- Single-wire and Dual-wire Wrist Strap Compatible
- Embedded CCD Barcode Scanner
- Ethernet Communication
- Adjustable Resistance Limits
- Programmable Test Requirements
- Compatible with Proximity Readers
- Embedded relay terminal for use with electronic locks, turnstiles and light fixtures
- 5 Year Warranty
TEAM5 Software
TEAM5 is the most powerful and accurate ESD Test Acquisition Software on the market. Use TEAM5 to automate and manage the ESD test data collected by the SmartLog V5™. Click here to learn more.
Item | Description | List Price |
50762 | SmartLog V5™, Europe, w/o Software | $3,633.00 |
50763 | SmartLog V5™, Euro, 10MM Adapter, w/o Software | $3,633.00 |
50764 | Reader Only, SmartLog V5™, HID ProxPoint Plus | $580.00 |
50765 | Reader Only, SmartLog V5™, HID iClass | $600.00 |
50491 | TEAM5 Enterprise Software with 1 Year Service | $6,166.77 |
50493 | TEAM5 Software with 1 Year Service | $1,000.00 |
*US Patent 6,078,875
“Compliance verification records shall be established and maintained to provide evidence of conformity to the technical requirements. The test equipment selected shall be capable of making the measurements defined in the compliance verification plan.” [EN 61340-5-1 Edition 1.0 2007-08 clause 5.2.3 Compliance verification plan]
All items & programmes are available through your participating distributor | Submit your questions HERE
Introducing Trustat ESD Products
Quality Products at an Economy Price!
|
|
Item | Description | Price |
52017 | Econo Wristband, Adj, 4mm | $4.39 |
52018 | Econo Coiled Cord, Adj, 4mm, Snap, 1 Meg, Black | $4.56 |
52019 | Econo Coiled Cord, 3.6M, 4mm, Snap, 1 Meg, Black | $4.56 |
52020 | Econo Wrist Strap, Adj, Blue, 1.8M Cord, 4mm Snap | $5.79 |
52021 | Trustat Wrist Strap, Adj, Blue , 1.8M Cord, 4mm Snap | $5.79 |
52022 | Ergoband Wrist Strap, Blue , 1.8M Cord, 4mm Snap | $18.07 |
52026 | Econo Wristband, Adj, 10 mm Snap, Cloth, Blue/Black | $4.37 |
52027 | Econo Coil Cord,1.8 m, 10 mm Snap, 1 Meg, Black | $4.56 |
52028 | Econo Coil Cord, 3.6 m, 10 mm Snap, 1 Meg, Black | $4.56 |
52029 | Econo Wrist Strap, Adj, Blue, Cloth, 1.8M, 10MM Snap | $5.79 |
52030 | Trustat Wrist Strap, Adj, Blue, 1.8 m, 10 mm Snap | $5.79 |
52031 | Ergoband Wrist Strap, Blue, 1.8 m, 10 mm Snap | $18.07 |
“All personnel shall be grounded … when handling ESDS [ESD sensitive items]. When personnel are seated at ESD protective workstations, they shall be connected to ground via a wrist strap system.” [EN 61340-5-1 Edition 1 2007-08 clause 5.3.2 Personnel grounding] Where continuous monitoring is used, no additional testing is required.” [EN 61340-4-1, per A.5.2]
“The wrist band will normally be worn for several hours at a time so it needs to be comfortable while making good contact with the skin. It is a good idea to check the wrist strap every time it is applied. Constant on line monitors can be used so that any breaks will be immediately found.” [EN 61340-5-2 section 5.2.7]